Wednesday, March 4, 2015

Gateway (61)

Post 61 in an ongoing series describing the design and construction of a kabukimon, a type of Japanese gate. This is a project for the Museum of Fine Arts in Boston. Post 1 in this series can be found here if you'd like to start at the beginning. Each post links to the next at the bottom of the page. Recent installments also to be found in the 'Blog archive' index to the right of the page.

--------

Starting now to fit the rails to the hanging stile of the right hand main door:


A closer look:


The other rail now fitted:


Closer look - though I didn't bother to remove the clamps:


The battens fit to the hanging stile with simple single tenons each, shouldered all around, so they were comparatively quick and easy to fit. Took all of 5 minutes for the four battens.

Though it was not really necessary, I felt a hankering to assemble something, after weeks and months of cutting and cutting. The door seemed like it suddenly needed a trial fit:


I laid it over and got some clamps involved:


It's the biggest door I've built, soon to be one of two.

It seemed like an opportunity to film the drawing together of the parts, so as to show the general quality of the fit:


A row of through tenons:


A closer look at one of them:


The door was then taken apart, and it was on to fitting the parts on the left side door. By the end of the day it was moved well along however it was time to sharpen up before things could proceed much further. So home I went.

All for this time. I hope you enjoyed your visit. Post 62 is awaiting your click.

4 comments:

  1. That fit up must have been tremendously satisfying. It was fun to watch!

    ReplyDelete
    Replies
    1. Matt,

      glad you like the video. It was really nice to see an assembly after cutting so many parts, and it opens up a certain 'light at the end of the tunnel' in regards to seeing the end of fabrication work on this project now in sight.

      ~C

      Delete
  2. Hi Chris, how big are those doors? They seemed bigger than I imagined from the drawings. Also, how does the weight/density of that Cedar compare with Eastern White Pine? Watching you work with it makes me think it must be similar.


    - Harlan Barnhart

    ReplyDelete
    Replies
    1. These doors are 2520mm tall by 1201mm, which is about 99" x 47" or so. As far as density, POC is 32 lbs per cubic foot while Eastern White Pine is 25 lbs per cubic foot. So, about POC is some 30% heavier than the pine.

      ~C

      Delete

All comments are moderated:

Anonymous comments will be deleted

Spam will be deleted

Comments containing links unrelated to blog content will be deleted